News, Events and Publications

Abstract Transient well test data conveys significant information about the subsurface heterogeneities in terms of some variations in the well test pressure response curves. It is therefore important to enhance the use of the well test data for building a validated geological model to include the effective reservoir heterogeneities that are reflected on the well …

Abstract A new workflow that uses the strain derived from geomechanical modeling of hydraulic fractures interacting with natural fractures is applied to an Eagle Ford well. The derived strain map is used to estimate the asymmetric half lengths that are input in any frac design software able to incorporate this new information. The simplistic symmetric …

Upscaling of the geological model is an important stage in a reservoir simulation work-flow that introduces error due to averaging of sub-grid heterogeneity and numerical diffusion. Upscaling errors are generally more severe in compositional flow simulation than in black oil modeling due to the inherent equilibrium assumption that increases numerical diffusion significantly. When coarse grid …

Abstract History matching of the numerical model was conducted in a heterogeneous sandstone reservoir where the hydrocarbon gas injection inter-well test was implemented to confirm the injectivity and the incremental oil effect prior to the expansion to full field operation. To decrease the degree of the misfit between simulated and measured values, some of the …

Abstract This paper presents a coupled geomechancal and fluid flow simulation for a hydrocarbon reservoir in exploitation process. Two simulators have been used: 1. Geomechanical simulation software FLAC3D which uses Finite Difference Method and 2. tNavigator which is a Finite Element solver engin for fluid flow simulation in porous media. The parameters connecting fluid flow …